Rebar Alternatives Save Big $$$

Contact Us

Fill out the form below to request more information from our Bladensburg location.

"*" indicates required fields

Hidden
This field is for validation purposes and should be left unchanged.

View our privacy policy

MD: Bladensburg

(301) 927-8300

4700 Annapolis Road, Bladensburg, MD 20710, USA

Mon-Fri 6:30AM to 4:00PM Saturday 6:30AM to 12:00PM Sunday CLOSED

Get In Touch with someone at MD: Bladensburg
(301) 927-8300

"*" indicates required fields

Accepted file types: pdf, txt, Max. file size: 2 MB.
Hidden
Response time within 4 hours

Cost-Effective Masonry

Aaron Fisher | September 1, 2021

If you want to build cheap you use wood, if you want to build to last you should use masonry. Right? Not necessarily true anymore.

4- Story Multifamily Residential Structure in Washington, DC *

Building Type Total Cost ($) Insurance Cost ($) Construction Cost ($) Cost $/SF Relative Cost
Masonry and Precast Floors
           23,472,621                  89,632                23,382,989   242.06 98
Conventional Wood Framing            24,106,262               156,938                23,949,324  247.92 100
Light Gage Steel Framing            24,191,911               157,496                24,034,415  248.80 100
ICF Walls and Precast Plank            25,823,848                  98,611                25,725,237   266.31 107
ICF Walls and ICF Concrete Floor Alternate            26,491,356               101,159                26,390,197  273.19 110

Wages determined using federal prevailing wage in August 2020

Yeah, But Why?

Energy Code

As the energy codes have gotten stricter, building costs have gone up. Better insulated windows, doors, and walls cost more. But costs have not escalated equally for all types of buildings. On its own, wood is a poorly insulating material. To meet code insulation is added between studs. The effectiveness of insulation is directly correlated to its thickness. All else being equal doubling the thickness of a piece of insulation, double its R-value (insulating capacity).

The costs come in at two points,

  1. More insulation = more money
  2. Thicker insulation –> thicker studs  = more money

Masonry and concrete are inherently more insulating because they have thermal mass (retain heat better). Thus the amount of additional insulation to meet codes is substantially reduced.

Wood Frame Blown Over

Wood-framed building under construction that toppled due to wind.

Insurance

Construction insurance is dependent on two factors:

  • Dollar value of the work- With most of these systems they are +/- 15%; which only accounts for a small fraction of the issue.
  • Likelihood of a problem- most of the problem is here
    • Fire- wood is a combustible material. An accidental or intentional spark– especially prior to installation of fire suppression — would result in a total loss
    • Structural stability- Some materials like wood, are not fully stable until finished (why we brace walls) and subject to forces like wind shear. Again a risk that could result in a total loss of an uncompleted structure.

HVAC + Fire Safety

Masonry creates a better building envelope. That is there is less exchange of air between the air in the building and outside the building. Thus to heat or cool a building takes less energy, allowing for smaller HVAC units. A substantial savings right from purchase.

Additional savings are also realized in reduced life and fire safety requirements because of the strength and resiliency of masonry (e.g., tornado shelters, reduced sprinklering). Simply put concrete is less combustible then wood, meaning less additional materials and work are needed to comply with building code.

Other Benefits

Largely ignored in the table above, but could result in additional cost savings during construction.

Masonry also yields other potential savings depending on the desired aesthetic. Architectural CMU’s and veneers can be left exposed avoiding costs associated with drywall or other interior finishes. This is not an option with wood, which would quickly degrade if exposed to the elements.

In short, masonry might not only save on operational expenses it might be the cheaper option from the jump.

*The building model chosen for the project was a 4 story multi-family residential structure encompassing approximately 25,000 gross square feet of building area per floor. Based on
the proposed target building types. The model is assembled using a mix of one and two bedroom dwelling units. The combination of the two different layout considerations would
more realistically address the variety of construction configurations commonly found in the multi-family dwelling marketplace.

For more information on the study or to see other cities: https://www.buildingstudies.org/

VP of Business DevelopmentAaron Fisher

Phone
Location
MD: Bladensburg
Languages
English

Latest News

Stop Building Tunnels for Stormwater

Stop Building Tunnels for Stormwater

Engineers love big projects. They are statements of competence, and also make big money. However, bigger isn’t always better and […]

Read More
Understanding The Installation Costs Of Permeable Pavement

Understanding The Installation Costs Of Permeable Pavement

Permeable pavement has emerged as a leading solution in modern construction, known for its environmental benefits and ability to manage […]

Read More
What Accessories Do You Need For Working With Concrete?

What Accessories Do You Need For Working With Concrete?

Working with concrete is an integral part of construction, whether it involves laying foundations, building structures, or creating pathways. The […]

Read More
The Mirage of Carbon Capture

The Mirage of Carbon Capture

The impact of CO2 and other greenhouse gases on climate change is undeniable. To address this issue, the allure of […]

Read More