TEXTROFLASH Flashing

Sold by the 75' Roll

H&B's Textroflash™ Flashing is a thru-wall or surface-mounted flashing with a 40-mil thick composite membrane with a proprietary high-tack adhesive. This adhesive is factory-laminated to rugged, polyethylene sheeting, yielding a flexible membrane that is suitable for application to masonry, concrete, steel, gypsum and wood.

  • Adhesive-backed with removable release paper, will not drool when exposed to UV or heat.

  • Provides dual-layered waterproofing protection.

  • Resists tearing and slicing.

  • Hohmann & Barnard recommends the use of Stainless Steel pre-formed soldered corners and end dams.

  • UV-resistant for up to 120 days.

  • For thru-wall and surface-mount applications


Submittal Information

All rolls are 75' long. 12" Width are 3 rolls/box; 16" and 18" are 2 rolls/box; and 24" is 1 roll/box
0 Available at: Unvailable at: MD: Bladensburg (HQ)Change Store
  • For use as surface-mount & thru-wall flashing ONLY.
  • This product should be used in conjunction with:
    • Primer-SA Hohmann & Barnard’s Water-Based Primer for Self-Adhering Flashing
    • HB Sealant
  • A stainless steel or copper H&B Drip Plate is strongly recommended to effectively guide moisture to the exterior
  • A H&B Termination Bar (T1 or T2) must also be used for surface-mount applications
  • Maximum ½” unsupported gap, for gaps greater that ½” fill with backer rod
  • Hohmann & Barnard is not responsible for incompatibility resulting from the use of non-H&B products